Site with 97*48 specifications, seeking high cost‑effectiveness and requiring wet‑sheet inventory.
Palletizing Veneer Stacker Series
Combined‑version veneer stacker‑97
Combined‑version veneer stacker‑97 is designed for Site with 97*48 specifications, seeking high cost‑effectiveness and requiring wet‑sheet inventory, focusing on In the 97 veneer downstream process, manual stacking and handling are labor‑intensive, and wet‑board inventory management is under significant pressure.
Trial CommitmentWithin three months from the date of equipment delivery, if the equipment is unable to function properly due to non‑human factors, it shall be subject to return or replacement in accordance with the contract.
Palletizing Veneer Stacker Series
Combined‑version veneer stacker‑97
Integrating the sorting and organizing of 97‑specification stacks with gantry palletizing into a single unit reduces the labor intensity of downstream multi‑person collaboration.
Integrating the sorting and organizing of 97‑specification stacks with gantry palletizing into a single unit reduces the labor intensity of downstream multi‑person collaboration.Problem solvingAfter 97 veneer processing, manual stacking, yard handling, and wet‑board inventory pose significant challenges.
Adaptation SiteSite with 97*48 specifications, seeking high cost‑effectiveness and requiring wet‑sheet inventory.
Core ValueIntegrating 97-specification sheet stacking and palletizing into a single system reduces the need for multi-person collaboration in downstream operations.
Adaptation Judgment
Confirm whether this model is suitable for your factory use
Integrating the sorting and organizing of 97‑specification stacks with gantry palletizing into a single unit reduces the labor intensity of downstream multi‑person collaboration.
First confirm whether the site is suitable: Site with 97*48 specifications, seeking high cost‑effectiveness and requiring wet‑sheet inventory.
Technical Parameters
Refer to this section for the key parameters.
Chinese nameCombined‑version veneer stacker‑97
Common Industry Term in the Wood SectorPalletizing and stacking integrated machine / Palletizing veneer stacker / Sheet‑stacking palletizer / Board‑collecting machine / Four‑turn board‑collecting machine / Four‑turn veneer stacker
Equipment ModelLHMDDB-X-97
Product generation2025 joint‑edition model
Veneer receiving and stacking specifications97×48 used as a single‑purpose board
Veneer receiving thickness range1.7 — 6.0 mm
Hinge opening rangeFixed configuration for the 97 specification
Continuous Acceptance of Log Diameters35 cm
View full technical specifications
Chinese nameCombined‑version veneer stacker‑97
Common Industry Term in the Wood SectorPalletizing and stacking integrated machine / Palletizing veneer stacker / Sheet‑stacking palletizer / Board‑collecting machine / Four‑turn board‑collecting machine / Four‑turn veneer stacker
Equipment ModelLHMDDB-X-97
Product generation2025 joint‑edition model
Veneer receiving and stacking specifications97×48 used as a single‑purpose board
Veneer receiving thickness range1.7 — 6.0 mm
Hinge opening rangeFixed configuration for the 97 specification
Continuous Acceptance of Log Diameters35 cm
Applicable Wood SpeciesEucalyptus, Fir, Pine, Mixed Wood,
Veneer Stacker Main Frame60×60 square tube
Hinge MotorStepper motor 50 N
Walking Motor for the PalletizerConventional motor
Maximum hinge speed192 cycles per minute
Rotary cutter maximum speed85 meters
Palletizing load capacity100kg
Palletizing at Maximum Speed30 seconds per round trip
Comprehensive stabilization of operating conditions during board collection and stackingGreater than 8 and less than 10 m³/hour (0.022-thickness plate)
Total equipment power5.75 kW (normal full load around 1.5 kW).
Total equipment weightApproximately 2.6 tons
Equipment Unfolded Installation DimensionsLength 7,650 × width 2,000 mm (including the stacking rail, based on the actual layout).
Equipment Shipping and Container DimensionsConfirmed according to the shipping plan
Control methodPLC centralized control
Core PatentsInvention patent
The parameters are provided for preliminary reference in the design; the actual configuration shall be subject to on-site measurements, equipment models, and contract confirmation.
Product gallery
Joint-version veneer stacker – Product image of model 97
- Model: LHMDDB-X-97
- 97×48 single‑use
- Hinge‑making speed up to 192 times per minute
- Rotary Cutter Height Up to 85 Meters
- Total power consumption: 5.75 kW
Installation and after-sales service
Please confirm these conditions before delivery
Tengsen is responsible for initial installation, commissioning, and operator training; users must cooperate by arranging forklift unloading, three‑phase power, and compressed‑air supply.
The entire machine is covered by a six‑month warranty, excluding wear‑prone parts such as conveyor belts; non‑human‑caused failures are eligible for return or replacement within three calendar months.
After the warranty period, paid on‑site repair services and spare parts supply are provided, along with long‑term free technical guidance.
Related Products
Return to the Product Center