Branded wood veneer plants, plywood mills operating their own veneer workshops, large‑scale veneer core plants
Flagship details
Integrated Palletizing and Stacking Machine
The palletizing and stacking integrated machine integrates high‑speed veneer receiving and stacking, sorting and alignment, and gantry‑type palletizing into a single unit, ideal for continuously receiving, palletizing, and forklifting 97×48 and 127×68 veneer sheets.
Trial CommitmentWithin three months from the date of equipment delivery, if the equipment is unable to function properly due to non‑human factors, it shall be subject to return or replacement in accordance with the contract.
Flagship details
Integrated Palletizing and Stacking Machine
The palletizing and stacking integrated machine combines high‑speed veneer receiving and stacking, sorting and alignment, and gantry palletizing into one unit, suitable for the continuous receipt, palletizing, and forklift transport of 97×48 and 127×68 veneer sheets.
Stacking and palletizing are performed in a single operation, with stable, steady‑state performance achieving a stacking rate of 10–12 m³ per hour.Problem solvingReduce labor costs, enhance factory competitiveness, and address labor shortages: manual veneer receiving and stacking is physically demanding, stacking is uneven, manual counting leads to errors, and it’s inconvenient for forklifts to transport stock to the drying yard, resulting in the sale of damp veneer.
Line AdaptationAny type of rotary peeler—single-push, double-push, and pressure‑bar models—is compatible with rotary peelers and veneer slicers from various manufacturers.
Solution EvaluationConfirm the board size, thickness, and site layout—width, length, and the stacking/discharge method.
Adaptation Judgment
Confirm whether this model is suitable for your factory use
Ideal for medium‑ to large‑scale rotary veneer production lines, this solution integrates veneer receiving and stacking, counting, sorting, palletizing, and outbound transfer into a single rear‑end unit, minimizing manual board handling and secondary transfers.
Confirm 97/127 specifications and board thicknesses of 1.7–6.0 mm
Technical Parameters
Refer to this section for the key parameters.
Chinese nameSix‑code veneer stacker – dual‑purpose
Common Industry Term in the Wood SectorPalletizing and stacking integrated machine / Palletizing veneer stacker / Sheet‑stacking palletizer / Board‑collecting machine / Four‑turn board‑collecting machine / Four‑turn veneer stacker
Equipment ModelTSMDDB-X-6T-127/97
Product generation2025 sixth‑generation smart flagship model
Veneer receiving and stacking specifications97×48 — 127×68 dual-purpose
Veneer receiving thickness range1.7 — 6.0 mm
Hinge opening rangeAdjustable from 96 to 131 mm
Continuous Acceptance of Log Diameters50 cm
View full technical specifications
Chinese nameSix‑code veneer stacker – dual‑purpose
Common Industry Term in the Wood SectorPalletizing and stacking integrated machine / Palletizing veneer stacker / Sheet‑stacking palletizer / Board‑collecting machine / Four‑turn board‑collecting machine / Four‑turn veneer stacker
Equipment ModelTSMDDB-X-6T-127/97
Product generation2025 sixth‑generation smart flagship model
Veneer receiving and stacking specifications97×48 — 127×68 dual-purpose
Veneer receiving thickness range1.7 — 6.0 mm
Hinge opening rangeAdjustable from 96 to 131 mm
Continuous Acceptance of Log Diameters50 cm
Applicable Wood SpeciesEucalyptus, pine, mixed hardwoods, rubberwood, fir, poplar, and winter melon wood
Veneer Stacker Main Frame80×80 square tube
Hinge MotorServo motor 2.3 kW
Walking Motor for the PalletizerServo motor 2.3 kW
Maximum hinge speed230 cycles per minute (3.8 closures per second)
Rotary cutter maximum speed140 meters per minute
Palletizing load capacity100 KG
Palletizing at Maximum Speed24 seconds per cycle (longest round-trip distance)
Comprehensive stabilization of operating conditions during board collection and stackingGreater than 10, less than 12 m³/hour (for 0.022‑inch thick sheets)
Total equipment powerRated at 13.1 kW; under normal full load, approximately 3 kW.
Total equipment weightApproximately 2.8 tons
Equipment Unfolded Installation DimensionsApproximately 8,050 mm long × approximately 4,300 mm wide (customized to suit the workshop layout)
Equipment Shipping and Container DimensionsLength 4,300 × width 2,400 × height 3,000 mm
Control methodEquipped with an intelligent PLC and touch‑screen operation, supporting remote maintenance and operation
Core PatentsInvention-Patented Products
The parameters are provided for preliminary reference in the design; the actual configuration shall be subject to on-site measurements, equipment models, and contract confirmation.
Product gallery
From the overall machine structure to the top‑view installation diagram
- Expanded installation dimensions: 8050 mm × 4300 mm
- Shipping container dimensions: 4300 mm × 2400 mm × 3000 mm
- Equipment weight: approximately 2.8 tons
- Maximum speed of the rotary lathe: 140 meters per minute
- Hinge stacking maximum speed: 230 times/minute
- Hinge opening: Adjustable from 96 to 131 mm
- Stacking load: 100 kg
- Maximum stacking speed: 24 seconds per cycle
- Stable operating conditions: 10–12 m³/hour
- Compatible with 97*48–127*68
- Normal full‑load power consumption is about 3 kW
- Supports remote operations and maintenance
Installation and after-sales service
Please confirm these conditions before delivery
Tengsen is responsible for initial installation, commissioning, and operator training; users must cooperate by arranging forklift unloading, three‑phase power, and compressed‑air supply.
The entire machine is covered by a six‑month warranty, excluding wear‑prone parts such as conveyor belts; non‑human‑caused failures are eligible for return or replacement within three calendar months.
After the warranty period, paid on‑site repair services and spare parts supply are provided, along with long‑term free technical guidance.
Related Products
Return to the Product Center